|
| Browse Catalog [1] [2] |
|
5-Pack Plastic Bag Kit for JDS Dust-Force
5-Pack of replacement bottom bags for the JDS Dust-Force 1.5 hp dust collector. The bags are a 7 mil rugged plastic that provide a 42 gallon capacity. The clear plastic lets you see how much you're collecting and when to change bags.
|
3" to 6" clamps use a small bridge pin with 3/8" wide Nitrile seal. 7" to 11" clamps use large bridge pin with 3/8" wide Nitrile seal. 12" to 24" clamps use large bridge pin with 1/2" wide Nitrile seal. Please select your desired clamp size from the dropdown window below.
|
|
The JDS Dust Collection Accessory Kit includes one 4-inch by 10-foot hose, universal dust hood, jointer dust hood, table saw dust hood, and two 4-inch hose clamps. This Kit is perfect for use with the JDS Dust-Force when used as a portable collection system.
|
Galvinized 30 degree elbow. Please select the desired diameter from the dropdown window below.
|
|
Galvinized 45 degree elbow. Please select the desired diameter from the dropdown window below.
|
Galvinized 60 degree elbow. Please select the desired diameter from the dropdown window below.
|
|
Galvinized 90 degree elbow. Please select the desired diameter from the dropdown window below.
|
Galvinized Long Radius 30 degree elbow. Please select the desired diameter from the dropdown window below.
|
|
Galvinized Long Radius 45 degree elbow. Please select the desired diameter from the dropdown window below.
|
Three inch diameter pipe is 39 inches long and has the lock-form seam construction. Four inch diameter and above are 59.25 inches long and have laser welded seam rolled ends. Please select the desired diameter from the dropdown window below.
|
|
Reduces sound levels from fans and equipment. Please select the desired diameter from the dropdown window below.
|
1 Micron bag Kit for JDS Dust Force
The 1 Micron bag kit is for the JDS Dust-Force 1.5 hp dust collector. The kit comes with a 1 micron upper bag and one clear plastic bottom bag. This kit will filter the dust particles collected down to 1 micron in size.
|
|
The Accu-Miter 18-34 has a rigid 18" front fence with a telescopic inner rail that extends to 34". Equipped with a micro-adjusting stop, the adjustable Accu-Bar, and a tapered shot pin system, this miter gauge is the ultimate tool for making accurate cuts.
|
The Adjustable Nipple with O-Ring is used to provide variable lenght adjustment of the Quick Fit System. Please select the desired diameter from the dropdown window below.
|
|
Disposable Pre-Filter Model 750 and 350
This disposable pre-filter is for the JDS Air-Tech 750 and 350. The average life of this filter ranges from 6 to 8 weeks, when used regularly. The actual life of the filter will depend on the amount of dust created each day.
|
The Multi-Router Machine Stand is a sturdy base that enables the Multi-Router to operate at its peak performance.
|
|
Quickly and safely secure your work with the MC-1 Manual Clamp for the Accu-Miter. The MC-1 Clamp uses a unique clamping system that holds your work to the bar, alowing you to move the Accu-Miter across the table with your hands away from the saw blade.
|
The Standard Tenon Template for the Multi-Router is recommended when the woodworker utilizes a dimensionally accurate cutting bit. This template traced by a ball bearing stylus is an accurate and uncomplicated method of producing tenons. Choose the tenon size from the drop down window.
|
|
Titanium Coated Long 1/2 x 1/2 x 2 x 4
Titanium Coated Long 1/2 x 1/2 x 2 x 4 is a double fluted, titanium nitride coated high speed steel, spiral end mill, upcut bit. It has a mill diameter of 1/2 inch and a shank diameter of 1/2 inch. The length of cut is 2 inches and the overall length of the bit is 4 inches.
|
5 Micron bag Kit for JDS Dust Force
The 5 Micron bag kit is for the JDS Dust-Force 1.5 hp dust collector. The kit comes with a 5 micron upper bag and one clear plastic bottom bag. This kit will filter the dust particles collected down to 5 microns in size.
|
|
The Accu-Miter 24-46 has a rigid 24" front fence with a telescopic inner rail that extends to 46". Equipped with a micro-adjusting stop, the adjustable Accu-Bar, and a tapered shot pin system, this miter gauge is the ultimate tool for making accurate cuts.
|
Internal Bag Filter Model 750-ER and 350
This internal bag filter is for all JDS Air-Tech 750 and 350 models. The average life of this filter is approximately 1 1/2 years, when used regularly. The actual life of the filter will depend on the amount of dust created each day.
|
|
Master Insert Holder (For Variable Size Template Inserts)
The Master Insert Holder is used to hold the different size tenon insert sets. The same Master Holder is used to hold any of the tenon inserts. The advantages to this system are that you only need one template and when you need a different size, just swap out the inserts. The inserts also come in three differnt versions of the tenon size, to compensate for variations in your bit and your wood.
|
Achieve accurate multiple cut-offs quickly and precisely! The Micro adjusting flip-stop has a two knob system that allows for accurate cross cutting.
|
|
The optional pneumatic clamping system provides for quick clamping when you have short production runs. The hand operated switch mounts conveniently to the base of the Multi-Router for easy access. The clamps can be positioned to reach any area of the work surface.
|
Titanium Coated Long 3/8 x 3/8 x 1 1/2 x 3 1/4
Titanium Coated Long 3/8 x 3/8 x 1 1/2 x 3 1/4 is a double fluted, titanium nitride coated high speed steel, spiral end mill, upcut bit. It has a mill diameter of 3/8 inch and a shank diameter of 3/8 inch. The length of cut is 1 1/2 inches and the overall length of the bit is 3 1/4 inches.
|
|
5-Pack Plastic Bag Kit for JDS 2 HP Cyclone
5-Pack of replacement collection bags for the JDS 2 hp Cyclone dust collector. The bags are a 7 mil rugged plastic that provide a 40 gallon capacity. The clear plastic lets you see how much you're collecting and when to change bags.
|
The adjustable bar for the Accu-Miter lets you easily adjust your bar to fit your table saw. Just tighten the four screws to expand the nylon split washers and eliminate any sloppy movement. The Accu-Bar also comes with a washer at the end for table saws that have a T-shaped slot.
|
|
The Multi-Router comes with two manual clamps as standard equipment. Sometimes an extra clamp is useful when clamping a very large workpiece as well as a fixture or jig for positioning a large workpiece.
|
Titanium Coated Long 1/4 x 3/8 x 1 1/4 x 3 1/16
Titanium Coated Long 1/4 x 3/8 x 1 1/4 x 3 1/16 is a double fluted, titanium nitride coated high speed steel, spiral end mill, upcut bit. It has a mill diameter of 1/4 inch and a shank diameter of 3/8 inch. The length of cut is 1 1/4 inches and the overall length of the bit is 3 1/16 inches.
|
|
Variable Size Tenon Insert Sets
The Variable Size Tenon Insert Sets are for use with the Master Insert Holder. Each size comes with a set of 3 inserts, A-B-C. Each insert varies slightly in size, to compensate for differences in your bit and the type of wood used. Choose the size tenon from the drop down window.
|
Washable Electrostatic Pre-Filter Model 750 and 350 (Optional)
This washable electrostatic pre-filter is standard equipment with the JDS Air-Tech 750-ER. It replaces the disposable prefilter on the earlier Model 750 and 350. A monthly washing will restore this filter to like-new condition. It has a 10 year warranty.
|
|
5-Pack Plastic Bag Kit for JDS 3 HP Cyclone
5-Pack of replacement collection bags for the JDS 3 hp Cyclone dust collector. The bags are a 7 mil rugged plastic that provide a 55 gallon capacity. The clear plastic lets you see how much you're collecting and when to change bags.
|
Charcoal Filter Model 750-ER and 350 (Optional)
This charcoal filter is for all JDS Air-Tech 750 and 350 models. It replaces the diffusing filter on the back of the unit. It will elliminate smoke, odors, and other fumes. The average life of this filter ranges from 2 to 4 months, when used regularly. The actual life of the filter will depend on the amount of smoke and fumes created each day.
|
|
The Circular Tenon Templates for the Multi-Router will achieve a dimensionally round tenon. Choose the tenon size from the drop down window.
|
The Pro-Scale replaces the standard scale and sight glass and digitally measures the verticle travel of the router. This provides for really precise positioning during various set-ups. The Pro-Scale Measuring System comes with a digital display, a Pro-Scale read head and scale, digital display mounting bracket, micro-adjuster, and one micro-adjuster knob.
|
|
Titanium Coated Short 3/8 x 3/8 x 3/4 x 2 1/2
Titanium Coated Short 3/8 x 3/8 x 3/4 x 2 1/2 is a double fluted, titanium nitride coated high speed steel, spiral end mill, upcut bit. It has a mill diameter of 3/8 inch and a shank diameter of 3/8 inch. The length of cut is 3/4 inch and the overall length of the bit is 2 1/2 inches.
|
The Box Joint Templates for the Multi-Router will achieve a stunning finger joint. Choose the finger size from the drop down window.
|
|
Disposable Pre-Filter Models 8-12 and 10-16
This disposable pre-filter is for the JDS Air-Tech Models 8-12 and 10-16. The average life of this filter ranges from 6 to 8 weeks, when used regularly. The actual life of the filter will depend on the amount of dust created each day.
|
Multi-Router Instructional Video
For a deposit of $20.00, we will send to you a video that shows the capabilities of The Multi-Router. Return the video and your money will be refunded. If you buy the Multi-Router, we will refund your deposit and the video remains yours! Available in DVD or VHS format. Choose format in the drop down window below.
|
|
Titanium Coated Short 1/4 x 3/8 x 5/8 x 2 7/16
Titanium Coated Short 1/4 x 3/8 x 5/8 x 2 7/16 is a double fluted, titanium nitride coated high speed steel, spiral end mill, upcut bit. It has a mill diameter of 1/4 inch and a shank diameter of 3/8 inch. The length of cut is 5/8 inch and the overall length of the bit is 2 7/16 inches.
|
Carbide 1/2 x 1/2 x 2 x 4 is a double fluted, solid carbide, spiral end mill, upcut bit. It has a mill diameter of 1/2 inch and a shank diameter of 1/2 inch. The length of cut is 2 inches and the overall length of the bit is 4 inches.
|
|
The Dovetail Set Templates for the Multi-Router come in a set of two. One Template produces the Tail portion and the second cuts the Pins portion.
|
Internal Bag Filter Models 8-12 and 10-16
This internal bag filter is for the JDS Air-Tech Models 8-12 and 10-16. The average life of this filter is approximately 1 1/2 years, when used regularly. The actual life of the filter will depend on the amount of dust created each day.
|
|
The 1/2" Dovetail Set Templates for the Multi-Router come in a set of two. One template cuts theTails, the second template produces the Pins.
|
Carbide 3/8 x 1/2 x 1 1/4 x 3 is a double fluted, solid carbide, spiral end mill, upcut bit. It has a mill diameter of 3/8 inch and a shank diameter of 1/2 inch. The length of cut is 1 1/4 inches and the overall length of the bit is 3 inches.
|
|
Washable Electrostatic Pre-Filter Models 8-12 and 10-16 (Optional)
This washable electrostatic pre-filter is optional equipment for the JDS Air-Tech Models 8-12 and 10-16. It replaces the disposable prefilter on the front of the unit. A monthly washing will restore this filter to like-new condition. It has a 10 year warranty.
|
Carbide 1/4 x 1/4 x 1 x 2 1/2 is a double fluted, solid carbide, spiral end mill, upcut bit. It has a mill diameter of 1/4 inch and a shank diameter of 1/4 inch. The length of cut is 1 inch and the overall length of the bit is 2 1/2 inches.
|
|
Charcoal Filter Models 8-12 and 10-16 (Optional)
This charcoal filter is for the JDS Air-Tech Models 8-12 and 10-16. It replaces the diffusing filter on the back of the unit. It will elliminate smoke, odors, and other fumes. The average life of this filter ranges from 2 to 4 months, when used regularly. The actual life of the filter will depend on the amount of smoke and fumes created each day.
|
The Mitered Dovetail Template for the Multi-Router can achieve beautiful mitered dovetail joints.
|
|
 |
|
| E-commerce powered by MonsterCommerce shopping cart. |